Infrastructure/Hosts/SGM-DEN-OBM-01.LATHAMA.NET
< Infrastructure | Hosts
Jump to navigation
Jump to search
| Key | Value |
|---|---|
| MAC | 00:80:a3:96:57:9c 00:80:A3:96:57:9D |
| IP Address | 192.168.15.100 |
| Site | DEN |
| Room | Basement |
| Status | Operational |
| Commissioned | |
| Decommissioned | |
| Make | Lantronix |
| Model | SLB 882 Hardware Revision: 4 |
| RAM | 128mb |
| Drives | CF Size: 512 MB |
| Firmware | 7.8.0.0RC3 |
| OS | Linux version 2.6.34 |
Lantronix SLB 882
Summary
Network Ethernet Ethernet 1: State: DHCP IP Address: 192.168.15.100 Subnet Mask: 255.255.255.0 IPv6 Address: [none] Mode: Auto-negotiate MTU: 1500 Ethernet 2: State: DHCP IP Address: [none] Subnet Mask: [none] IPv6 Address: [none] Mode: Auto-negotiate MTU: 1500 IPv6: disabled Ethernet Bonding: disabled Gateway Default: [none] Precedence: DHCP-Acquired Network Fail-over: [none] IP Address to Ping: [none] Ethernet Port for Ping: Ethernet 1 Delay between Pings: 3 seconds Number of Failed Pings: 10 Fail-over Device: [none] Fail-over Device - APN of Mobile Carrier: [none] Fail-over Device - PIN # for SIM Card: [none] Fail-over Device - PIN Lock: disabled Fail-over Device - SIM PUK: [none] Fail-over Device - Cellular Username: [none] Fail-over Device - Cellular Password: [none] Fail-over Device - Cellular DialUp String: none Fail-over Device - Cellular Roaming: disabled Fail-over Device - Administrator Login: [none] Fail-over Device - Cellular Passthrough: disabled Fail-over Device - Cellular DHCP: disabled Fail-over Device - Administrator Password: [none] DNS DNS Server #1: 8.8.4.4 DNS Server #2: 8.8.8.8 DNS Server #3: [none] Hostname Hostname: sgm-den-obm-001 Domain: lathama.net Parameters TCP Keepalive: Start Probes: 600 seconds Number of Probes: 5 Interval: 60 seconds IP Forwarding: disabled IP Filter State: disabled Routing RIP: disabled RIP Version: 2 Static Routing: disabled VPN Tunnel: disabled Only start VPN tunnel in network fail-over mode: disabled Name: [none] Ethernet Port: 1 Remote Host: [none] Remote Id: [none] Remote Hop/Router: [none] Remote Subnet: [none] Local Id: [none] Local Hop/Router: [none] Local Subnet: [none] Authentication: RSA Public Key RSA Public Key of Remote Host: [none] IKE Negotiation: Main Mode IKE Encryption/Authentication/DH Group: Any/Any/Any ESP Encryption/Authentication/DH Group: Any/Any/Any Perfect Forward Secrecy: enabled Mode Config Client: disabled XAUTH Client: disabled XAUTH Login: [none] Services Date/Time & NTP Timezone: GMT NTP: enabled Synchronize via: Poll NTP Server(s) Poll NTP Server: Public Local Servers: #1: [none] #2: [none] #3: [none] Public Server: 0.pool.ntp.org System Log Network Level: warning Services Level: warning Authentication Level: warning Device Ports Level: warning Diagnostics Level: warning General Level: warning Remote Servers: #1: [none] #2: [none] Audit Log Audit Log: enabled Size: 50 Kbytes Include CLI Commands: disabled Include in System Log: disabled Telnet Telnet: disabled Timeout: disabled Web Telnet: disabled Escape Sequence: \x1bT Outgoing Telnet: enabled SSH SSH: enabled Timeout: disabled Web SSH: disabled Port: 22 Use only SHA2 and Higher: disabled Web SSH/ Web Telnet Settings Terminal Buffer Size: 250 lines SNMP SNMP: disabled Traps: disabled NMS #1: [none] NMS #2: [none] Read-Only Community: public Read-Write Community: private Trap Community: public Enable v1/v2c: enabled/enabled Location: location Contact: contact V3 Read-Only User: snmpuser V3 Read-Write User: snmprwuser V3 Security: Auth/No Encrypt V3 Authentication: MD5 V3 Encryption: DES Alarm Delay: 60 seconds Traps Sent: coldStart (1.3.6.1.6.3.1.1.5.1) linkDown (1.3.6.1.6.3.1.1.5.3) linkUp (1.3.6.1.6.3.1.1.5.4) authenticationFailure (1.3.6.1.6.3.1.1.5.5) slbEventPowerSupply (1.3.6.1.4.1.244.1.12.0.1) slbEventSysadminPassword (1.3.6.1.4.1.244.1.12.0.2) slbEventSLBShutdown (1.3.6.1.4.1.244.1.12.0.3) slbEventDevicePortData (1.3.6.1.4.1.244.1.12.0.4) slbEventDevicePortSLMData (1.3.6.1.4.1.244.1.12.0.5) slbEventDevicePortSLMConfig (1.3.6.1.4.1.244.1.12.0.6) slbEventOverCurrentAlarm (1.3.6.1.4.1.244.1.12.0.7) slbEventPowerOutletStateChange (1.3.6.1.4.1.244.1.12.0.8) slbEventDevicePortDeviceLowTemp (1.3.6.1.4.1.244.1.12.0.9) slbEventDevicePortDeviceHighTemp (1.3.6.1.4.1.244.1.12.0.10) slbEventDevicePortDeviceLowHumidity (1.3.6.1.4.1.244.1.12.0.11) slbEventDevicePortDeviceHighHumidity (1.3.6.1.4.1.244.1.12.0.12) slbEventDevicePortDeviceError (1.3.6.1.4.1.244.1.12.0.13) slbEventPCCardAction (1.3.6.1.4.1.244.1.12.0.14) slbEventInternalTemp (1.3.6.1.4.1.244.1.12.0.15) slbEventDevicePortError (1.3.6.1.4.1.244.1.12.0.17) slbEventNoDialToneAlarm (1.3.6.1.4.1.244.1.12.0.18) slbEventNetworkFailover (1.3.6.1.4.1.244.1.12.0.23) SMTP Server: [none] Sender: donotreply@$host.$domain NFS NFS Mount #1: Remote Directory: [none] Local Directory: [none] Read/Write: disabled Mount: disabled NFS Mount #2: Remote Directory: [none] Local Directory: [none] Read/Write: disabled Mount: disabled NFS Mount #3: Remote Directory: [none] Local Directory: [none] Read/Write: disabled Mount: disabled CIFS State: disabled Share to Ethernet 1: enabled Share to Ethernet 2: enabled Workgroup: [none] SLB Network Search: Local Subnet and Manually Entered IP Address List Phone Home State: disabled IP Address: [none] Web Timeout: 5 minutes TLS v1.0 Protocol: enabled TLS v1.1 Protocol: enabled Cipher: High (256, 168, 128 bit), Medium (128 bit) Use only SHA2 and Higher Ciphers: disabled iGoogle Gadget Web Content: disabled Group Access: [none] Banner: [none] Network Interfaces: Eth1,Eth2 Web Server: enabled Percepxion Communicate with Portal: disabled Interval between status updates: 2 minutes Interval between FW and Cfg updates: 24 hours Firmware Updates via Percepxion: enabled Configuration Updates via Percepxion: enabled Reboot after FW or Config Update: disabled Allow Remote Connections: enabled Audit Log Messages: enabled Device Name: SLB_579c Device Description: Secure Lantronix Branch Office Manager Cloud Registration Host: api.percepxion.ai Cloud Registration Port: 443 Cloud Use HTTPS for registration: enabled Cloud Validate certificates with HTTPS: disabled Cloud Messaging Services: enabled Remote Access CLI Timeout: 600 Remote Access Device Port Timeout: 600 Active Connection to Cloud: enabled On-Premise Registration Host: demo.lantronix.com On-Premise Registration Port: 443 On-Premise Use HTTPS for registration: enabled On-Premise Validate certificates with HTTPS: disabled On-Premise Messaging Services: enabled Authentication Settings Attempt next method on authentication rejection: enabled Local Users State: enabled Order: 1 Allow Multiple Sysadmin Logins: disabled Sysadmin Access Limited to Console Port: disabled Complex Passwords: disabled Allow Reuse: enabled Reuse History: 4 Password Lifetime: 90 days Warning Period: 7 days Max Login Attempts: disabled Lockout Period: disabled Remote Users Authenticate using only Remote Users List: disabled NIS State: disabled Order: disabled Domain: [none] Broadcast for NIS Server: disabled Master: [none] Slave #1: [none] Slave #2: [none] Slave #3: [none] Slave #4: [none] Slave #5: [none] Data Ports: 1-8,U1,U2 Listen Ports: 1-8,U1,U2 Clear Ports: 1-8,U1,U2 Power Outlets: 1-8 Group: Default Users Permissions: [none] Custom Menu: [none] Enabled for Dial-back: disabled Dial-back Number: [none] Escape Sequence: \x1bA Break Sequence: \x1bB LDAP State: disabled Order: disabled Server: [none] Base: [none] Bind Name: [none] Bind with Login: disabled Use LDAP Schema for User Attributes & Permissions: disabled Port: 389 Active Directory Support: disabled Encrypt: disabled User Filter: [none] Group Filter: [none] Group Membership Attribute: [none] Group Member Value: Name Data Ports: 1-8,U1,U2 Listen Ports: 1-8,U1,U2 Clear Ports: 1-8,U1,U2 Power Outlets: 1-8 Group: Default Users Permissions: [none] Custom Menu: [none] Enabled for Dial-back: disabled Dial-back Number: [none] Escape Sequence: \x1bA Break Sequence: \x1bB RADIUS State: disabled Order: disabled Server #1: Server: [none] Port: 1812 Server #2: Server: [none] Port: 1812 Timeout: 30 seconds Use VSA: disabled Data Ports: 1-8,U1,U2 Listen Ports: 1-8,U1,U2 Clear Ports: 1-8,U1,U2 Power Outlets: 1-8 Group: Default Users Permissions: [none] Custom Menu: [none] Enabled for Dial-back: disabled Dial-back Number: [none] Escape Sequence: \x1bA Break Sequence: \x1bB Kerberos State: disabled Order: disabled Realm: [none] KDC: [none] KDC IP Address: [none] Port: 88 Use LDAP for Lookup: disabled Data Ports: 1-8,U1,U2 Listen Ports: 1-8,U1,U2 Clear Ports: 1-8,U1,U2 Power Outlets: 1-8 Group: Default Users Permissions: [none] Custom Menu: [none] Enabled for Dial-back: disabled Dial-back Number: [none] Escape Sequence: \x1bA Break Sequence: \x1bB TACACS+ State: disabled Order: disabled Server #1: [none] Server #2: [none] Server #3: [none] Secret: [none] Encrypt: enabled Authentication Service: PPP/PAP Service: shell Protocol: [none] Data Ports: 1-8,U1,U2 Listen Ports: 1-8,U1,U2 Clear Ports: 1-8,U1,U2 Power Outlets: 1-8 Group: Default Users Permissions: [none] Custom Menu: [none] Enabled for Dial-back: disabled Dial-back Number: [none] Escape Sequence: \x1bA Break Sequence: \x1bB Timeout: 5 seconds Devices Console Port Baud Rate: 115200 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: none Timeout: disabled Show Lines on Connecting: 24 lines Group Access: [none] Banner: [none] Device Ports Device Port 1: Name: Port-1 Banner: [none] Group Access: [none] Break Sequence: \x1bB View Port Log Sequence: \x1bV View Port Log: disabled Connected To: [none] Device Login: [none] Device Prompt: [none] IP Settings: Telnet: disabled Telnet Port: 2001 Telnet Authentication: enabled Telnet Timeout: 600 seconds SSH: enabled SSH Port: 3001 SSH Authentication: disabled SSH Timeout: 600 seconds TCP: disabled TCP Port: 4001 TCP Authentication: disabled TCP Timeout: 600 seconds IP Address/Netmask Bits: [none] Data Settings: Baud Rate: 115200 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: none Logins: disabled Check DSR: disabled Close DSR: disabled Max Direct Connects: 1 Show Lines On Connecting: disabled Modem Settings: State: disabled Mode: Text Use Sites: disabled Initialization Script: [none] Caller ID Logging: disabled Caller ID Modem Cmd: [none] Timeout Logins: disabled Dial-back Number: Local User Number Dial-back Delay: 15 seconds Dial-back Retries: 3 Negotiate IP Address: enabled Local IP Address: [none] Remote IP Address: [none] Authentication: PAP CHAP Host/User Name: [none] CHAP Auth Uses: CHAP Host DOD Authentication: PAP DOD CHAP Host/User Name: [none] NAT: disabled Dial-out Number: [none] Dial-out Login: [none] Dial-in Host List: [none] Idle Timeout: disabled Restart Delay: 30 seconds CBCP Server Allow No Callback: disabled CBCP Client Type: Admin-defined Number Logging Settings: Local Logging: disabled Syslog Logging: disabled NFS File Logging: disabled Max Number of Files: 10 Max Size of Files: 2048 bytes Directory to log to: [none] Email/Trap: disabled Send via: Email Byte Threshold: 100 Email Delay: 60 seconds Restart Delay: 60 seconds Text String: [none] Email To: [none] Email Subject: Port %d Logging USB Logging: disabled Log to: Upper Slot Max Number of Files: 10 Max Size of Files: 2048 bytes SLM Logging: disabled NMS: [none] Byte Threshold: 100 Time Frame: 60 seconds Device Port 2: Name: Port-2 Banner: [none] Group Access: [none] Break Sequence: \x1bB View Port Log Sequence: \x1bV View Port Log: disabled Connected To: [none] Device Login: [none] Device Prompt: [none] IP Settings: Telnet: disabled Telnet Port: 2002 Telnet Authentication: enabled Telnet Timeout: 600 seconds SSH: enabled SSH Port: 3002 SSH Authentication: disabled SSH Timeout: 600 seconds TCP: disabled TCP Port: 4002 TCP Authentication: disabled TCP Timeout: 600 seconds IP Address/Netmask Bits: [none] Data Settings: Baud Rate: 115200 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: none Logins: disabled Check DSR: disabled Close DSR: disabled Max Direct Connects: 1 Show Lines On Connecting: disabled Modem Settings: State: disabled Mode: Text Use Sites: disabled Initialization Script: [none] Caller ID Logging: disabled Caller ID Modem Cmd: [none] Timeout Logins: disabled Dial-back Number: Local User Number Dial-back Delay: 15 seconds Dial-back Retries: 3 Negotiate IP Address: enabled Local IP Address: [none] Remote IP Address: [none] Authentication: PAP CHAP Host/User Name: [none] CHAP Auth Uses: CHAP Host DOD Authentication: PAP DOD CHAP Host/User Name: [none] NAT: disabled Dial-out Number: [none] Dial-out Login: [none] Dial-in Host List: [none] Idle Timeout: disabled Restart Delay: 30 seconds CBCP Server Allow No Callback: disabled CBCP Client Type: Admin-defined Number Logging Settings: Local Logging: disabled Syslog Logging: disabled NFS File Logging: disabled Max Number of Files: 10 Max Size of Files: 2048 bytes Directory to log to: [none] Email/Trap: disabled Send via: Email Byte Threshold: 100 Email Delay: 60 seconds Restart Delay: 60 seconds Text String: [none] Email To: [none] Email Subject: Port %d Logging USB Logging: disabled Log to: Upper Slot Max Number of Files: 10 Max Size of Files: 2048 bytes SLM Logging: disabled NMS: [none] Byte Threshold: 100 Time Frame: 60 seconds Device Port 3: Name: Port-3 Banner: [none] Group Access: [none] Break Sequence: \x1bB View Port Log Sequence: \x1bV View Port Log: disabled Connected To: [none] Device Login: [none] Device Prompt: [none] IP Settings: Telnet: disabled Telnet Port: 2003 Telnet Authentication: enabled Telnet Timeout: 600 seconds SSH: enabled SSH Port: 3003 SSH Authentication: disabled SSH Timeout: 600 seconds TCP: disabled TCP Port: 4003 TCP Authentication: disabled TCP Timeout: 600 seconds IP Address/Netmask Bits: [none] Data Settings: Baud Rate: 115200 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: none Logins: disabled Check DSR: disabled Close DSR: disabled Max Direct Connects: 1 Show Lines On Connecting: disabled Modem Settings: State: disabled Mode: Text Use Sites: disabled Initialization Script: [none] Caller ID Logging: disabled Caller ID Modem Cmd: [none] Timeout Logins: disabled Dial-back Number: Local User Number Dial-back Delay: 15 seconds Dial-back Retries: 3 Negotiate IP Address: enabled Local IP Address: [none] Remote IP Address: [none] Authentication: PAP CHAP Host/User Name: [none] CHAP Auth Uses: CHAP Host DOD Authentication: PAP DOD CHAP Host/User Name: [none] NAT: disabled Dial-out Number: [none] Dial-out Login: [none] Dial-in Host List: [none] Idle Timeout: disabled Restart Delay: 30 seconds CBCP Server Allow No Callback: disabled CBCP Client Type: Admin-defined Number Logging Settings: Local Logging: disabled Syslog Logging: disabled NFS File Logging: disabled Max Number of Files: 10 Max Size of Files: 2048 bytes Directory to log to: [none] Email/Trap: disabled Send via: Email Byte Threshold: 100 Email Delay: 60 seconds Restart Delay: 60 seconds Text String: [none] Email To: [none] Email Subject: Port %d Logging USB Logging: disabled Log to: Upper Slot Max Number of Files: 10 Max Size of Files: 2048 bytes SLM Logging: disabled NMS: [none] Byte Threshold: 100 Time Frame: 60 seconds Device Port 4: Name: Port-4 Banner: [none] Group Access: [none] Break Sequence: \x1bB View Port Log Sequence: \x1bV View Port Log: disabled Connected To: [none] Device Login: [none] Device Prompt: [none] IP Settings: Telnet: disabled Telnet Port: 2004 Telnet Authentication: enabled Telnet Timeout: 600 seconds SSH: enabled SSH Port: 3004 SSH Authentication: disabled SSH Timeout: 600 seconds TCP: disabled TCP Port: 4004 TCP Authentication: disabled TCP Timeout: 600 seconds IP Address/Netmask Bits: [none] Data Settings: Baud Rate: 115200 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: none Logins: disabled Check DSR: disabled Close DSR: disabled Max Direct Connects: 1 Show Lines On Connecting: disabled Modem Settings: State: disabled Mode: Text Use Sites: disabled Initialization Script: [none] Caller ID Logging: disabled Caller ID Modem Cmd: [none] Timeout Logins: disabled Dial-back Number: Local User Number Dial-back Delay: 15 seconds Dial-back Retries: 3 Negotiate IP Address: enabled Local IP Address: [none] Remote IP Address: [none] Authentication: PAP CHAP Host/User Name: [none] CHAP Auth Uses: CHAP Host DOD Authentication: PAP DOD CHAP Host/User Name: [none] NAT: disabled Dial-out Number: [none] Dial-out Login: [none] Dial-in Host List: [none] Idle Timeout: disabled Restart Delay: 30 seconds CBCP Server Allow No Callback: disabled CBCP Client Type: Admin-defined Number Logging Settings: Local Logging: disabled Syslog Logging: disabled NFS File Logging: disabled Max Number of Files: 10 Max Size of Files: 2048 bytes Directory to log to: [none] Email/Trap: disabled Send via: Email Byte Threshold: 100 Email Delay: 60 seconds Restart Delay: 60 seconds Text String: [none] Email To: [none] Email Subject: Port %d Logging USB Logging: disabled Log to: Upper Slot Max Number of Files: 10 Max Size of Files: 2048 bytes SLM Logging: disabled NMS: [none] Byte Threshold: 100 Time Frame: 60 seconds Device Port 5: Name: Port-5 Banner: [none] Group Access: [none] Break Sequence: \x1bB View Port Log Sequence: \x1bV View Port Log: disabled Connected To: [none] Device Login: [none] Device Prompt: [none] IP Settings: Telnet: disabled Telnet Port: 2005 Telnet Authentication: enabled Telnet Timeout: 600 seconds SSH: enabled SSH Port: 3005 SSH Authentication: disabled SSH Timeout: 600 seconds TCP: disabled TCP Port: 4005 TCP Authentication: disabled TCP Timeout: 600 seconds IP Address/Netmask Bits: [none] Data Settings: Baud Rate: 38400 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: none Logins: disabled Check DSR: disabled Close DSR: disabled Max Direct Connects: 1 Show Lines On Connecting: 24 lines Modem Settings: State: disabled Mode: Text Use Sites: disabled Initialization Script: [none] Caller ID Logging: disabled Caller ID Modem Cmd: [none] Timeout Logins: disabled Dial-back Number: Local User Number Dial-back Delay: 15 seconds Dial-back Retries: 3 Negotiate IP Address: enabled Local IP Address: [none] Remote IP Address: [none] Authentication: PAP CHAP Host/User Name: [none] CHAP Auth Uses: CHAP Host DOD Authentication: PAP DOD CHAP Host/User Name: [none] NAT: disabled Dial-out Number: [none] Dial-out Login: [none] Dial-in Host List: [none] Idle Timeout: disabled Restart Delay: 30 seconds CBCP Server Allow No Callback: disabled CBCP Client Type: Admin-defined Number Logging Settings: Local Logging: disabled Syslog Logging: disabled NFS File Logging: disabled Max Number of Files: 10 Max Size of Files: 2048 bytes Directory to log to: [none] Email/Trap: disabled Send via: Email Byte Threshold: 100 Email Delay: 60 seconds Restart Delay: 60 seconds Text String: [none] Email To: [none] Email Subject: Port %d Logging USB Logging: disabled Log to: Upper Slot Max Number of Files: 10 Max Size of Files: 2048 bytes SLM Logging: disabled NMS: [none] Byte Threshold: 100 Time Frame: 60 seconds Device Port 6: Name: Port-6 Banner: [none] Group Access: [none] Break Sequence: \x1bB View Port Log Sequence: \x1bV View Port Log: disabled Connected To: [none] Device Login: [none] Device Prompt: [none] IP Settings: Telnet: disabled Telnet Port: 2006 Telnet Authentication: enabled Telnet Timeout: 600 seconds SSH: enabled SSH Port: 3006 SSH Authentication: disabled SSH Timeout: 600 seconds TCP: disabled TCP Port: 4006 TCP Authentication: disabled TCP Timeout: 600 seconds IP Address/Netmask Bits: [none] Data Settings: Baud Rate: 9600 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: none Logins: disabled Check DSR: disabled Close DSR: disabled Max Direct Connects: 1 Show Lines On Connecting: disabled Modem Settings: State: disabled Mode: Text Use Sites: disabled Initialization Script: [none] Caller ID Logging: disabled Caller ID Modem Cmd: [none] Timeout Logins: disabled Dial-back Number: Local User Number Dial-back Delay: 15 seconds Dial-back Retries: 3 Negotiate IP Address: enabled Local IP Address: [none] Remote IP Address: [none] Authentication: PAP CHAP Host/User Name: [none] CHAP Auth Uses: CHAP Host DOD Authentication: PAP DOD CHAP Host/User Name: [none] NAT: disabled Dial-out Number: [none] Dial-out Login: [none] Dial-in Host List: [none] Idle Timeout: disabled Restart Delay: 30 seconds CBCP Server Allow No Callback: disabled CBCP Client Type: Admin-defined Number Logging Settings: Local Logging: disabled Syslog Logging: disabled NFS File Logging: disabled Max Number of Files: 10 Max Size of Files: 2048 bytes Directory to log to: [none] Email/Trap: disabled Send via: Email Byte Threshold: 100 Email Delay: 60 seconds Restart Delay: 60 seconds Text String: [none] Email To: [none] Email Subject: Port %d Logging USB Logging: disabled Log to: Upper Slot Max Number of Files: 10 Max Size of Files: 2048 bytes SLM Logging: disabled NMS: [none] Byte Threshold: 100 Time Frame: 60 seconds Device Port 7: Name: Port-7 Banner: [none] Group Access: [none] Break Sequence: \x1bB View Port Log Sequence: \x1bV View Port Log: disabled Connected To: [none] Device Login: [none] Device Prompt: [none] IP Settings: Telnet: disabled Telnet Port: 2007 Telnet Authentication: enabled Telnet Timeout: 600 seconds SSH: enabled SSH Port: 3007 SSH Authentication: disabled SSH Timeout: 600 seconds TCP: disabled TCP Port: 4007 TCP Authentication: disabled TCP Timeout: 600 seconds IP Address/Netmask Bits: [none] Data Settings: Baud Rate: 9600 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: none Logins: disabled Check DSR: disabled Close DSR: disabled Max Direct Connects: 1 Show Lines On Connecting: 24 lines Modem Settings: State: disabled Mode: Text Use Sites: disabled Initialization Script: [none] Caller ID Logging: disabled Caller ID Modem Cmd: [none] Timeout Logins: disabled Dial-back Number: Local User Number Dial-back Delay: 15 seconds Dial-back Retries: 3 Negotiate IP Address: enabled Local IP Address: [none] Remote IP Address: [none] Authentication: PAP CHAP Host/User Name: [none] CHAP Auth Uses: CHAP Host DOD Authentication: PAP DOD CHAP Host/User Name: [none] NAT: disabled Dial-out Number: [none] Dial-out Login: [none] Dial-in Host List: [none] Idle Timeout: disabled Restart Delay: 30 seconds CBCP Server Allow No Callback: disabled CBCP Client Type: Admin-defined Number Logging Settings: Local Logging: disabled Syslog Logging: disabled NFS File Logging: disabled Max Number of Files: 10 Max Size of Files: 2048 bytes Directory to log to: [none] Email/Trap: disabled Send via: Email Byte Threshold: 100 Email Delay: 60 seconds Restart Delay: 60 seconds Text String: [none] Email To: [none] Email Subject: Port %d Logging USB Logging: disabled Log to: Upper Slot Max Number of Files: 10 Max Size of Files: 2048 bytes SLM Logging: disabled NMS: [none] Byte Threshold: 100 Time Frame: 60 seconds Device Port 8: Name: Port-8 Banner: [none] Group Access: [none] Break Sequence: \x1bB View Port Log Sequence: \x1bV View Port Log: disabled Connected To: [none] Device Login: [none] Device Prompt: [none] IP Settings: Telnet: disabled Telnet Port: 2008 Telnet Authentication: enabled Telnet Timeout: 600 seconds SSH: enabled SSH Port: 3008 SSH Authentication: disabled SSH Timeout: 600 seconds TCP: disabled TCP Port: 4008 TCP Authentication: disabled TCP Timeout: 600 seconds IP Address/Netmask Bits: [none] Data Settings: Baud Rate: 38400 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: none Logins: disabled Check DSR: disabled Close DSR: disabled Max Direct Connects: 1 Show Lines On Connecting: 24 lines Modem Settings: State: disabled Mode: Text Use Sites: disabled Initialization Script: [none] Caller ID Logging: disabled Caller ID Modem Cmd: [none] Timeout Logins: disabled Dial-back Number: Local User Number Dial-back Delay: 15 seconds Dial-back Retries: 3 Negotiate IP Address: enabled Local IP Address: [none] Remote IP Address: [none] Authentication: PAP CHAP Host/User Name: [none] CHAP Auth Uses: CHAP Host DOD Authentication: PAP DOD CHAP Host/User Name: [none] NAT: disabled Dial-out Number: [none] Dial-out Login: [none] Dial-in Host List: [none] Idle Timeout: disabled Restart Delay: 30 seconds CBCP Server Allow No Callback: disabled CBCP Client Type: Admin-defined Number Logging Settings: Local Logging: disabled Syslog Logging: disabled NFS File Logging: disabled Max Number of Files: 10 Max Size of Files: 2048 bytes Directory to log to: [none] Email/Trap: disabled Send via: Email Byte Threshold: 100 Email Delay: 60 seconds Restart Delay: 60 seconds Text String: [none] Email To: [none] Email Subject: Port %d Logging USB Logging: disabled Log to: Upper Slot Max Number of Files: 10 Max Size of Files: 2048 bytes SLM Logging: disabled NMS: [none] Byte Threshold: 100 Time Frame: 60 seconds USB U1 Port: none U2 Port: modem State: disabled Mode: Text Use Sites: disabled Group Access: [none] Initialization Script: [none] Caller ID Logging: disabled Caller ID Modem Cmd: [none] Timeout Logins: disabled Dial-back Number: Local User Number Dial-back Delay: 15 seconds Dial-back Retries: 3 Negotiate IP Address: enabled Local IP Address: [none] Remote IP Address: [none] Authentication: PAP CHAP Host/User Name: [none] CHAP Auth Uses: CHAP Host DOD Authentication: PAP DOD CHAP Host/User Name: [none] NAT: disabled Dial-out Number: [none] Dial-out Login: [none] Dial-in Host List: [none] Idle Timeout: disabled Restart Delay: 30 seconds CBCP Server Allow No Callback: disabled CBCP Client Type: Admin-defined Number Baud Rate: 115200 Data Bits: 8 Stop Bits: 1 Parity: none Flow Control: rts/cts GSM/GPRS Dial-out Mode: GPRS GPRS Context: AT+CGDCONT=1,"IP","[Access Point Name]" GSM/GPRS PPP Compression: disabled GSM Bearer Service: AT+CBST=7,0 GSM/GPRS Auto-acquire DNS: enabled Check Dial Tone: 15 minutes Service: none Telnet Port: 2050 Telnet Authentication: enabled SSH Port: 3050 SSH Authentication: enabled TCP Port: 4050 TCP Authentication: disabled Power Outlets Switching Delay: 2000 msec Over Current Alarm: disabled Outlet #1: Name: PowerOutlet-1 Description: Cisco2921 Power State: off Wakeup Mode: off Outlet #2: Name: PowerOutlet-2 Description: Cyclades Power State: on Wakeup Mode: on Outlet #3: Name: PowerOutlet-3 Description: TBD Power State: on Wakeup Mode: on Outlet #4: Name: PowerOutlet-4 Description: TBD Power State: on Wakeup Mode: on Outlet #5: Name: PowerOutlet-5 Description: TBD Power State: on Wakeup Mode: on Outlet #6: Name: PowerOutlet-6 Description: SGM-DEN-PSW-011 Power State: on Wakeup Mode: on Outlet #7: Name: PowerOutlet-7 Description: Cisco2960G Bottom Power State: on Wakeup Mode: on Outlet #8: Name: PowerOutlet-8 Description: Cisco2960G Power State: on Wakeup Mode: on System Banners Welcome: Welcome to the SLB Login: [none] Logout: [none] SSH: ssh Internal Temperature Acceptable Low Temperature: 0 °C Acceptable High Temperature: 50 °C Site Information Data Center Rack Row: 1 Data Center Rack Cluster: 1 Data Center Rack: 1 Site Tag/Description: [none] FTP/SFTP/TFTP Server Server: ftp.lantronix.com Path: /pub/slb/SLB882/6.3.0.0/ Login: guest LCD/Keypad LCD Time/Hostname Screen Order: 2 LCD Network Screen Order: 7 LCD Console Screen Order: 4 LCD Timezone Screen Order: disabled LCD Release Screen Order: disabled LCD Serial Number Screen Order: 5 LCD Device ID Screen Order: disabled LCD Device Ports Screen Order: 6 LCD Location Screen Order: disabled LCD Internal Temperature Order: 1 LCD User Strings Screen Order: disabled LCD SLB Power Screen Order: 3 LCD User String 1: Hello World LCD User String 2: sgm-den-obm-001 LCD Scrolling: enabled LCD Scroll Delay: 5 seconds LCD Idle Delay: 10 seconds Keypad: unlocked Monitor Performance Monitoring Number of operations kept for each probe: 50 operations Repository for operations: Local UDP Jitter Responder: disabled UDP Echo Responder: disabled TCP Connect Responder: disabled